Small Coin Pattern Garage Flooring

There are a few options for seaming two (or more) garage mats.  The first and easiest option is to simply overlap one roll onto another.  Take one roll and overlay 3-6" on top of the second roll.  Another way to connect two rolls is to use the Garage Floor Matting Center Connectors. Slide each roll into one end of the connector which grabs and holds onto the matting on both sides. Lastly, the matting can be seamed using the Garage Floor Mat Seaming Tape. This option gives the cleanest looking seam. After cleaning the edge of the first mat, roll it back and attach the double-sided tape to the underside, leaving roughly half of it exposed and protruding from the edge. After putting the first mat on the floor lift the second roll, clean the back edge and set it so that it lines up with the edge of the first roll. Although a little more work, this gives a smooth, seamless look with the tape being hidden from view underneath both mats.

Yes, a car jack can be safely used on top of the roll matting without damaging the floor.  Please note that if you leave the jack in place for a longer period of time there may be a slight indentation on the mat once the floor jack is moved elsewhere.  However, an indentation won't affect the functionality or durability of the matting.

Roll-out garage flooring is designed for heavy-duty use and can withstand a wide variety of applications including use in a trailer (including a horse trailer) and under tractors.  These rolls are stain, mildew and fade resistant, have a textured surface for enhanced traction and can easily be cut down to fit the contours of the floor of the trailer.  (Please note that we recommend gluing the garage flooring down for use in any trailer to ensure the matting stays securely in place).

These garage roll mats can easily be cut with a utility knife.  After laying out the mat, mark the area needing to be removed and then trace the same mark with the knife.  Once removed, the matting will still continue to function properly without premature deterioration.

You can certainly use these garage floor rolls to cover the floor of your boat.  We recommend that the floor of the boat be cleaned (and dry) before installing.  The matting itself should be glued down using outdoor Garage Flooring Adhesive. This matting is stain, mold and mildew resistant and will hold up to the sun and water (even salt water) exposure.

Garage Floor Matting Rolls are manufactured here in the US from premium ingredients and do not contain fillers or any toxic additives.  The garage rolls are composed of 100% pure vinyl and although it's possible to have a very faint 'new car smell' once received, the smell, if any, will quickly dissipate.  The rolls can be installed indoors after receiving them - there's no need to air them out first.  If you do find that there is a faint smell, a little liquid soap and warm water will help remove it more quickly.

Garage Roll Matting is perfectly suited for use in carports in which the rolls are exposed directly to the elements (rain, snow, sun, wind, temperature changes, etc.).  Thanks to it's composition and manufacturing process, these garage mats are fade- and mildew-resistant and will not absorb rain or snow that may blow in while remaining slip-resistant thanks to their textured surface pattern.  If being used wall-to-wall, and especially in environments where the temperature changes a lot, you may want to secure the matting with our Outdoor Garage Floor Adhesive to help keep it firmly in place and help prevent expansion and contraction.

All garage floor roll matting is manufactured here in the US from American sourced raw materials which ensures a high-quality, durable floor matting product that lasts for years, even under the most demanding conditions and in the harshest environments.

Although incredibly strong, garage flooring rolls can easily be cut to fit with a utility (razor) knife with a sharp blade.  It's best to mark the matting with a pencil (and a straight edge or ruler) and then cut along the line for a perfect fit.  Cutting the garage matting will not damage or deteriorate the remaining material.

Although minimal and only occurring with more extreme temperature swings, it is possible for the matting to slightly expand when the matting gets rather warm and contract just a bit when the temperature drops a lot.  Temperature fluctuation won't damage or deteriorate the matting in any way.  However, if installing wall-to-wall, it's a good idea to leave a slight gap (about 1/4" on each side) to allow for this phenomenon.